Newly designed transmission
with Dig function enables a tighter turning radius by locking the rear
axle for FWD power only.
Currie F9 Portal Axles
increase ground clearance at the diff pumpkin for the best crawling
Includes all-metal gears,
from the centre transmission to the lockers and portal axles.
Tube chassis design offers
optimum clearance plus realistic scale looks.
All pivot points are on
stainless steel balls for a durable, long-lasting suspension point.
3-piece, licensed Raceline beadlock wheels.
Adjustable oil-filled shocks
feature hard anodised, threaded shock bodies, a single coilover spring,
and a cap with a bleed port.
All-metal front universal
axles provide smooth action and 45 degrees of steering angle for an
efficient, high-performance drivetrain.
Durable, machined aluminium
Finely tuned suspension
geometry delivers the best crawling capabilities
The Axial® Capra™ 1.9
Unlimited Trail Buggy Builder's Kit is a "new from the ground up"
design that any advanced RC enthusiast eager for cutting-edge crawling will
appreciate. Its Currie F9 Portal Axles provide extra ground clearance at the
diff pumpkin for the best crawling performance. With the included Dig
transmission, you can also switch on the fly between 4WD and FWD directly from
your 3-channel transmitter - locking the rear axle whenever you need the tighter
turning radius of front drive power. The Capra features a realistic tube
chassis design and metal gears everywhere, from the centre transmission to the
lockers and portal axles. It rides on licensed Raceline 3-piece moulded
beadlock wheels that can be fitted with whatever 1.9 tyres you prefer. For
pioneering performance in an RC trail buggy kit, choose the Axial Capra.
Currie F9 Portal Axles add substantially more ground clearance at the diff
pumpkin while also providing an excellent 7.39:1 gear ratio. Completely ball
bearing driven, and metal gears throughout for durability.
and pinion gears are machined steel, including the locker. The design utilizes
a six bolt design for durability.
transmission has a Dig function that offers the tightest turning radius on a
production crawler in the industry. When needed, simply switch from 4WD to
front-wheel-drive by locking the rear axle from your transmitter. The
transmission also includes a full set of ball bearings and all metal internal
gears for strength and durability.
functionality requires an additional micro servo, not included. Micro Dig Servo
required, SPMSSX107 recommended (for Dig operation)
UNIVERSAL AXLE SET
joint axles allow up to 45 degrees of steering and provide smoother action for
a higher performing, efficient drivetrain.
Up to 45 degrees of steering
Smooth action for an
Compact yet durable design
Hardened steel construction
WB8 HD WILDBOAR™ DRIVESHAFTS
Wildboar™ front and rear driveshafts feature a larger diameter
cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for greater
strength. A centre splined slider floats between each end and has added
material to reduce flex and fatigue.
6MM STAINLESS STEEL LINKS
6mm stainless steel links with high grade plastic rod ends for durability. All
links are metal including the steering.
STAINLESS STEEL PIVOT BALLS
points are on stainless steel balls that provide a durable, long-lasting
SKIDPLATE WITH BOAT SIDES
features a small skidplate footprint with boat sides to help maneuver and slide
over rough, challenging obstacles.
STAINLESS STEEL STEERING LINKS
steering links are also made from 6mm stainless steel, offering precise
steering and durability.
LARGE BORE ALUMINIUM SHOCKS
oil-filled shocks are an all-new design with hard anodised, threaded shock
bodies and a single coilover spring. Their increased bore size creates more
fluid volume for better performance. A bleed screw helps to bleed air from the
shock during assembly for greater consistency. The shocks are also tunable so
you can achieve the best dampening rate.
fine-tuned the suspension geometry with multiple mounting locations for the
upper link mounts to provide the best crawling capabilities.
A1.9, 3-PIECE BEADLOCK WHEELS
striking scale looks and serious trail performance, we've outfitted the Capra™ with
officially licensed 3-piece Raceline Monster beadlock wheels.
LED LIGHT BAR
mounted LED light bar helps light the way on those late night crawls with your
friends. Additional LED lights can be added to the front headlights (optional
LED lights not included).
scale details include: polycarbonate interior tray with molded driver figures,
full color pre-cut decals with simulated carbon fiber panels, mock GPS
navigation gauges and switches, two black styrene helmets with visor decals,
GRILLE AND HEADLIGHT BUCKETS
molded plastic front grille features two clear plastic headlight lenses with
light buckets (optional LED lights not included). Behind the grille, under the
hood, are two hood mounts with clips. Remove the clips to raise the hood up and
gain access to the battery tray.
ESC / RECEIVER TRAY
under the front dash is a cage mounted ESC / receiver tray with integrated,
adjustable cable routing to keep your wiring organized.
battery tray is forward mounted, and located under the hood. The tray size is
built for shorty packs, at a maximum size of 26mm x 98mm x 47mm.
the clips hidden on the underside of the tube frame to raise the hood up and
gain access to the battery tray.
SERVO HORN WITH METAL INSERT
horn features a 23T press fit metal insert for durability.