SMD SRX 3 FH4 Sanwa Compatible Receiver FHSS-3 - FHSS-4 JBR900005
Description:
This SMD SRX 3 receiver is Sanwa compatible with FHSS-4 and FHSS-3.
Features:
1. Sanwa compatible 2.4GHz FH3/FH4 Selectable Via Transmitter binding process
2. High performance CPU enhances precision control feeling
3. 4 channel support.
4. Micro size (Antenna-Free: 18.2x20.2x27.4mm).
5. Operating Voltage 3.5V - 8.4V:
6. Weight: 5g
7. Battery Voltage Fail-Safe Limit: 3.5-5.0V (FH3) / 3.5-7.4V (FH4)
Compatible Transmitters:
Sanwa M17
Sanwa M12S
Sanwa M12
Sanwa MT44
Sanwa MT4S
Sanwa MT4
Sanwa M11X
Sanwa Exzes X, Z, ZZ
SANWA FH4 BIND:
1. Select FH-4 or FH-3 protocol on transmitter and switch to bind page.
2. Plug the 'bind cable' onto the receiver then power on. The receiver should enter the binding mode for 10 seconds (the led will slowly flash for 10 seconds).
3. Operate 'bind' operation on transmitter while the receiver led is slowly flashing.
If you did not make the 'bind' operation on transmitter in 10 seconds (receiver led slowly flashing), go back to Setp2 and do it again.
5. After binding please power off the receiver and transmitter, unplug the 'bind cable'. Then power them on to confirm they are bond.
